Shopping Cart Items: 0   Sub-Total : $0.00
Welcome, Guest ( Login )

Vises

Click for Details

Palmgren Cross vise, 3 in. - 32

$650.00
Item Number: 9630301

The Palmgren Cross Slide Vise provides quick and precise positioning along the X and Y axes. This gives your drill press movements and positioning similar to the lateral and cross travel of a milling machine. Counter-balanced ball crank handles enable smooth movement and do not extend below the base, eliminating interference with the machine table. Cross feed dials may be easily adjusted to start at zero. Precision machined dovetail ways ensure accuracy with smooth operation of longitudinal and cross travel. Built on the same cross-slide base as our tables, this precision cross slide vise has feed screws with precision cut ACME threads. Cross slide travel is 3-1/2" x 4". Dials are graduated in 0.001" increments. Counter-balanced ball-crank handles are solid steel. By removing two screws, the vise can be removed from the base and used as a conventional drill press vise.
View details about the Palmgren Cross vise, 3 in. - 32
Click for Details

Palmgren Cross vise, 3 in. - 32

$650.00
Item Number: 9630301

The Palmgren Cross Slide Vise provides quick and precise positioning along the X and Y axes. This gives your drill press movements and positioning similar to the lateral and cross travel of a milling machine. Counter-balanced ball crank handles enable smooth movement and do not extend below the base, eliminating interference with the machine table. Cross feed dials may be easily adjusted to start at zero. Precision machined dovetail ways ensure accuracy with smooth operation of longitudinal and cross travel. Built on the same cross-slide base as our tables, this precision cross slide vise has feed screws with precision cut ACME threads. Cross slide travel is 3-1/2" x 4". Dials are graduated in 0.001" increments. Counter-balanced ball-crank handles are solid steel. By removing two screws, the vise can be removed from the base and used as a conventional drill press vise.
View details about the Palmgren Cross vise, 3 in. - 32
Click for Details

Palmgren Angle sine vise, 4 in. - 13164

$645.00
Item Number: 9613164

Palmgren's Angle Sine vises are built for ultra precision grinding and inspection applications of small parts. Solid one-piece body, precision ground and heat treated to 55 HRC then tempered to ensure stability and durability. Screw type moveable jaw. Top, sides, and bottom are precision ground square and parallel. Parallelism: 0.0004" and Squareness: 0.0004" Minute angle steps allows very small angles to be set with ease using standard gauge blocks.
View details about the Palmgren Angle sine vise, 4 in. - 13164
Click for Details

Palmgren Angle sine vise, 4 in. - 13164

$645.00
Item Number: 9613164

Palmgren's Angle Sine vises are built for ultra precision grinding and inspection applications of small parts. Solid one-piece body, precision ground and heat treated to 55 HRC then tempered to ensure stability and durability. Screw type moveable jaw. Top, sides, and bottom are precision ground square and parallel. Parallelism: 0.0004" and Squareness: 0.0004" Minute angle steps allows very small angles to be set with ease using standard gauge blocks.
View details about the Palmgren Angle sine vise, 4 in. - 13164
Click for Details

Palmgren CNC dual force machine vise, 6 in. - 26610

$610.00
Item Number: 9626610

Request a Freight QuotePalmgren's CNC style is built for high precision part clamping. This vise is ideal for use in running production parts where flatness and parallelism is important. The moveable jaw delivers 1/2lb. Of downward force for every pound of horizontal pressure which assures that the moveable jaw will not lift during machining. Equipped with a friction reducing thrust bearing also increases jaw clamping pressure for safe accurate clamping. Vise can be mounted upright or on either side. CNC style allows for compact spacing. Both sides ground square to within 0.001" with base and top
View details about the Palmgren CNC dual force machine vise, 6 in. - 26610
Click for Details

Palmgren CNC dual force machine vise, 6 in. - 26610

$610.00
Item Number: 9626610

Request a Freight QuotePalmgren's CNC style is built for high precision part clamping. This vise is ideal for use in running production parts where flatness and parallelism is important. The moveable jaw delivers 1/2lb. Of downward force for every pound of horizontal pressure which assures that the moveable jaw will not lift during machining. Equipped with a friction reducing thrust bearing also increases jaw clamping pressure for safe accurate clamping. Vise can be mounted upright or on either side. CNC style allows for compact spacing. Both sides ground square to within 0.001" with base and top
View details about the Palmgren CNC dual force machine vise, 6 in. - 26610
Click for Details

Palmgren Toolmakers vise, 4 in. - 13154

$550.00
Item Number: 9613154

These vises are built for ultra precision grinding and inspection applications of small parts. Solid one piece body, precision ground and heat treated to 55 HRC then tempered to ensure stability and durability. Screw type moveable jaw. Top, sides, and bottom are precision ground square and parallel. Parallelism: 0.0001" and Squareness: 0.0002"
View details about the Palmgren Toolmakers vise, 4 in. - 13154
Click for Details

Palmgren Toolmakers vise, 4 in. - 13154

$550.00
Item Number: 9613154

These vises are built for ultra precision grinding and inspection applications of small parts. Solid one piece body, precision ground and heat treated to 55 HRC then tempered to ensure stability and durability. Screw type moveable jaw. Top, sides, and bottom are precision ground square and parallel. Parallelism: 0.0001" and Squareness: 0.0002"
View details about the Palmgren Toolmakers vise, 4 in. - 13154
Click for Details

Palmgren Drill press vise, 6 in. - 16

$405.00
Item Number: 9612602

The traditional Palmgren design for drilling, tapping, reaming and grinding. The rectangular shape allows it to be used laying on its base, sides or end for tremendous flexibility. Machined on five sides. The fixed jaw is grooved.
View details about the Palmgren Drill press vise, 6 in. - 16
Click for Details

Palmgren Drill press vise, 6 in. - 16

$405.00
Item Number: 9612602

The traditional Palmgren design for drilling, tapping, reaming and grinding. The rectangular shape allows it to be used laying on its base, sides or end for tremendous flexibility. Machined on five sides. The fixed jaw is grooved.
View details about the Palmgren Drill press vise, 6 in. - 16
Click for Details

Palmgren Industrial style angle vise w/swivel base, 6 in. - AVS60

$402.00
Item Number: 9611602

This heavy duty industrial angle vise is exceptionally robust for demanding angular applications. The body is calibrated from 0º to 90º in 5º graduations for precise angle drilling without the use of blocks or wedges. Two knurled socket-head bolts with lock washers on each of two thick side plates allow quick hand-tightening and secure wrench fastening to ensure solid locking in all positions. The fixed jaw is grooved; the removable base swivels 360º (1º graduations) and can be fastened in place with two bolts.
View details about the Palmgren Industrial style angle vise w/swivel base, 6 in. - AVS60
Click for Details

Palmgren Industrial style angle vise w/swivel base, 6 in. - AVS60

$402.00
Item Number: 9611602

This heavy duty industrial angle vise is exceptionally robust for demanding angular applications. The body is calibrated from 0º to 90º in 5º graduations for precise angle drilling without the use of blocks or wedges. Two knurled socket-head bolts with lock washers on each of two thick side plates allow quick hand-tightening and secure wrench fastening to ensure solid locking in all positions. The fixed jaw is grooved; the removable base swivels 360º (1º graduations) and can be fastened in place with two bolts.
View details about the Palmgren Industrial style angle vise w/swivel base, 6 in. - AVS60
Click for Details

Palmgren Comb. Bench & pipe vise, 6 in. - P746

$395.00
Item Number: 9629746

The Palmgren combination bench and pipe vises house a super strong power tunnel with straight-line pull that assures a lifetime spindle and nut. A precision fit of the slide bar eliminates side play and jaw wobble, even when clamping with the jaws wide open. Vise spindle and nut are completely enclosed in a square tube casting to protect them from dust, chips, and moisture. 60,000 psi ductile alloy stress parts - practically indestructible & 70% stronger than u-shaped styles. Vises have the throat depth to meat toughest job requirements. Reinforced anvils to handle addition non-clamping applications. Swivel base, dual lock downs, and 4 point mounting holes deliver secure clamping. Vises are ideal for maintenance applications, tool and die shops, fabrication shops, automotive garages, tradesmen, and construction sites. Vises can be used for indoor and outdoor applications. STANDARD DESIGN FEATURES: 60,000 PSI ductile castings; Sealed construction; Straight line pull; Replaceable serrated steel jaws; Replaceable pipe jaws; Large anvil; 360 degree swivel base with dual lock downs; Lifetime warranty.
View details about the Palmgren Comb. Bench & pipe vise, 6 in. - P746
Click for Details

Palmgren Comb. Bench & pipe vise, 6 in. - P746

$395.00
Item Number: 9629746

The Palmgren combination bench and pipe vises house a super strong power tunnel with straight-line pull that assures a lifetime spindle and nut. A precision fit of the slide bar eliminates side play and jaw wobble, even when clamping with the jaws wide open. Vise spindle and nut are completely enclosed in a square tube casting to protect them from dust, chips, and moisture. 60,000 psi ductile alloy stress parts - practically indestructible & 70% stronger than u-shaped styles. Vises have the throat depth to meat toughest job requirements. Reinforced anvils to handle addition non-clamping applications. Swivel base, dual lock downs, and 4 point mounting holes deliver secure clamping. Vises are ideal for maintenance applications, tool and die shops, fabrication shops, automotive garages, tradesmen, and construction sites. Vises can be used for indoor and outdoor applications. STANDARD DESIGN FEATURES: 60,000 PSI ductile castings; Sealed construction; Straight line pull; Replaceable serrated steel jaws; Replaceable pipe jaws; Large anvil; 360 degree swivel base with dual lock downs; Lifetime warranty.
View details about the Palmgren Comb. Bench & pipe vise, 6 in. - P746
Click for Details

Palmgren Ground vise, 4 in. - 14G

$330.00
Item Number: 9613401

Precision ground for squareness and parallelism to +.0002 per inch. This vise is machined and ground on five sides to assure accurate positioning for grinding and layout operations. Adjusting screws are steel with long bearing in the vise body. Both jaws are ground smooth
View details about the Palmgren Ground vise, 4 in. - 14G
Click for Details

Palmgren Ground vise, 4 in. - 14G

$330.00
Item Number: 9613401

Precision ground for squareness and parallelism to +.0002 per inch. This vise is machined and ground on five sides to assure accurate positioning for grinding and layout operations. Adjusting screws are steel with long bearing in the vise body. Both jaws are ground smooth
View details about the Palmgren Ground vise, 4 in. - 14G
Click for Details

Palmgren Angle sine vise, 2 in. - 13162

$324.00
Item Number: 9613162

Palmgren's Angle Sine vises are built for ultra precision grinding and inspection applications of small parts. Solid one-piece body, precision ground and heat treated to 55 HRC then tempered to ensure stability and durability. Screw type moveable jaw. Top, sides, and bottom are precision ground square and parallel. Parallelism: 0.0004" and Squareness: 0.0004" Minute angle steps allows very small angles to be set with ease using standard gauge blocks.
View details about the Palmgren Angle sine vise, 2 in. - 13162
Click for Details

Palmgren Angle sine vise, 2 in. - 13162

$324.00
Item Number: 9613162

Palmgren's Angle Sine vises are built for ultra precision grinding and inspection applications of small parts. Solid one-piece body, precision ground and heat treated to 55 HRC then tempered to ensure stability and durability. Screw type moveable jaw. Top, sides, and bottom are precision ground square and parallel. Parallelism: 0.0004" and Squareness: 0.0004" Minute angle steps allows very small angles to be set with ease using standard gauge blocks.
View details about the Palmgren Angle sine vise, 2 in. - 13162
Click for Details

Palmgren Cross vise, 8 in. - CV80

$320.00
Item Number: 9630801

The Palmgren cross slide vise provides quick and precise positioning along the X and Y axes. This gives your drill press movement and positioning similar to the lateral and cross travel of a milling machine. Counter-balanced ball crank handles enable smooth movement and do not extend below the base, eliminating interference with the machine table. Cross feed dials may be easily adjusted to start at zero. Precision machined dovetail ways ensure accuracy with smooth operation of longitudinal and cross travel. This industrial cross slide vise has ball crank handles that spin independently of the crank ball for rapid movement. Index collars are graduated in 1mm increments.
View details about the Palmgren Cross vise, 8 in. - CV80
Click for Details

Palmgren Cross vise, 8 in. - CV80

$320.00
Item Number: 9630801

The Palmgren cross slide vise provides quick and precise positioning along the X and Y axes. This gives your drill press movement and positioning similar to the lateral and cross travel of a milling machine. Counter-balanced ball crank handles enable smooth movement and do not extend below the base, eliminating interference with the machine table. Cross feed dials may be easily adjusted to start at zero. Precision machined dovetail ways ensure accuracy with smooth operation of longitudinal and cross travel. This industrial cross slide vise has ball crank handles that spin independently of the crank ball for rapid movement. Index collars are graduated in 1mm increments.
View details about the Palmgren Cross vise, 8 in. - CV80
Click for Details

Palmgren Comb. Bench & pipe vise, 5 in. - P745

$320.00
Item Number: 9629745

The Palmgren combination bench and pipe vises house a super strong power tunnel with straight-line pull that assures a lifetime spindle and nut. A precision fit of the slide bar eliminates side play and jaw wobble, even when clamping with the jaws wide open. Vise spindle and nut are completely enclosed in a square tube casting to protect them from dust, chips, and moisture. 60,000 psi ductile alloy stress parts - practically indestructible & 70% stronger than u-shaped styles. Vises have the throat depth to meat toughest job requirements. Reinforced anvils to handle addition non-clamping applications. Swivel base, dual lock downs, and 4 point mounting holes deliver secure clamping. Vises are ideal for maintenance applications, tool and die shops, fabrication shops, automotive garages, tradesmen, and construction sites. Vises can be used for indoor and outdoor applications. STANDARD DESIGN FEATURES: 60,000 PSI ductile castings; Sealed construction; Straight line pull; Replaceable serrated steel jaws; Replaceable pipe jaws; Large anvil; 360 degree swivel base with dual lock downs; Lifetime warranty.
View details about the Palmgren Comb. Bench & pipe vise, 5 in. - P745
Click for Details

Palmgren Comb. Bench & pipe vise, 5 in. - P745

$320.00
Item Number: 9629745

The Palmgren combination bench and pipe vises house a super strong power tunnel with straight-line pull that assures a lifetime spindle and nut. A precision fit of the slide bar eliminates side play and jaw wobble, even when clamping with the jaws wide open. Vise spindle and nut are completely enclosed in a square tube casting to protect them from dust, chips, and moisture. 60,000 psi ductile alloy stress parts - practically indestructible & 70% stronger than u-shaped styles. Vises have the throat depth to meat toughest job requirements. Reinforced anvils to handle addition non-clamping applications. Swivel base, dual lock downs, and 4 point mounting holes deliver secure clamping. Vises are ideal for maintenance applications, tool and die shops, fabrication shops, automotive garages, tradesmen, and construction sites. Vises can be used for indoor and outdoor applications. STANDARD DESIGN FEATURES: 60,000 PSI ductile castings; Sealed construction; Straight line pull; Replaceable serrated steel jaws; Replaceable pipe jaws; Large anvil; 360 degree swivel base with dual lock downs; Lifetime warranty.
View details about the Palmgren Comb. Bench & pipe vise, 5 in. - P745
Click for Details

Palmgren Self Centering Vise, 4 in. - SCV4

$280.00
Item Number: 9615404

This Palmgren self-centering low profile machine vise is ideal for use with drilling and milling machines where quick, accurate centering of the work piece is required. Constructed of close grained, high tensile strength alloy castings; Moveable jaws are mounted on precision ground and hardened guide rails; each vise come with three sets of 4" jaws, 1 pair of steel hardened, 1 pair of steel soft, and 1 pair of steel step jaws; LIFETIME GUARANTEE
View details about the Palmgren Self Centering Vise, 4 in. - SCV4
Click for Details

Palmgren Self Centering Vise, 4 in. - SCV4

$280.00
Item Number: 9615404

This Palmgren self-centering low profile machine vise is ideal for use with drilling and milling machines where quick, accurate centering of the work piece is required. Constructed of close grained, high tensile strength alloy castings; Moveable jaws are mounted on precision ground and hardened guide rails; each vise come with three sets of 4" jaws, 1 pair of steel hardened, 1 pair of steel soft, and 1 pair of steel step jaws; LIFETIME GUARANTEE
View details about the Palmgren Self Centering Vise, 4 in. - SCV4

COVID-19

MagnumTools.com has been deemed an "Essential” Business”. We are OPEN and filling orders. Hand packed orders are disinfected when packed. MagnumTools.com has inventory ready to ship. Order online or call. Online monitored 24/7, Office hours M-F 8 to 5 EST. Wishing you, your family well and thanking the staff, Dan Martin, Founder. Jason Pask, CEO 866-588-6300

Shop By Manufacturer

Shopping Cart

Your Cart Is Empty
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
0 Item(s)
$0.00