Sheet Metal Notchers

Ever have odd angles that you need to notch out of sheet metal, something that will look totally whack when finished if not done right?  Enter the SN-V04-MS; this great machine is a 220 volt three phase hydraulic sheet metal notcher.  This notcher will cut notches from 30 to 140 degrees in mild steel up to 6mm in thickness and will do this at up to 15 strokes per minute.

Free Shipping to COMMERCIAL ADDRESSES* within the lower 48 United States!

Brand New Woodward - Fab Model #WFCN4 Hydraulic corner notcher 8 5/8" x 8 5/8" blades Notch mild steel up to 4mm (.157") Stainless steel up to 3mm (.118") Cast iron top table 25" x 25" Includes adjustable stops and foot control 220 volt single phase electric.

Jet Hydraulic Sheet Metal Notcher-EMN-9

With a fixed 90° cutting angle, the JET Hydraulic Notcher delivers corner cuts like no hand tools can. Users may notch up to 9-gauge sheet metal up to 50 strokes per minute. The 7-3/4” blades can be re-sharpened repeatedly to improve lifespan and save costs.

Features:

• Strong casted head for years on use
• Rigid sheet metal stand helps hold accuracies of the cut
• CSA/CUS: Following strict guidelines and electrical requirements, this JET Notcher is CSA/CUS certified
• Blades are guarded to protect the operator

If you are looking for a little more capacity from your corner notcher, try the SN-F04-MS sheet metal corner notcher from Baileigh Industrial. The SN-F04-MS is great for making perfect corners in metal that are impossible with hand tools.  This corner notcher has a 6mm or 4 gauge mild steel capacity, so it can make quick work of most any job.  The SN-F04-MS corner notcher has blades that are fixed at 90°, ensuring a perfect notch every time. A 25.5” x 25.5” oversized working table includes table guides, for even more accuracy. Free Shipping to COMMERCIAL ADDRESSES* within the lower 48 United States!

Tin Knocker 10ft x 16 Ga. Duct Notcher TK-1016DK

Notches up to 6 times faster than hand notching. This 5 headed gang notcher is a fast and easy way to notch sheet metal ducting, in preparation to receive bar, S Cleats and Drive Cleats…or other drive connections. A real money maker in that it is fast, accurate and durable.

Quick Notch allows you to gang-notch sheet metal hydraulically up to 600% faster than by hand, without layout or scribing. It’s the perfect tool for preparing bar, slip or "s” and other drive connections.

The SN-F09-MS sheet metal corner notcher from Baileigh Industrial is the perfect machine for making those perfect corners in that just are not possible with hand tools. This corner notcher has a 9 gauge mild steel capacity, so it can make quick work of most any job. Because the SN-F09-MS has blades that are fixed at 90°, it ensures a perfect notch every time. An oversized table measuring 27” x 23.5” includes table guides, standard, to make tough jobs even easier.

Jet Pneumatic Sheet Metal Notcher-PMN-11

The JET Pneumatic Notcher handles up to 11 gauge mild steel, cutting perfect notches with blades that are fixed at 90°. The 5” blades can be regularly re-sharpened to increase savings and durability. The oversized table includes guides to improve accuracy.

Features:

• Strong casted head for years on use
• Rigid sheet metal stand helps hold accuracies of the cut
• All blades are guarded to protect the operator

The 5” blades on the SN-F11-AN corner notcher can be flipped and resharpened many times for even more life and cost savings. The SN-F11-AN air operated sheet metal notcher can run off of any air compressor that can put out between 90 and 115 PSI, which should allow this great tool to be used anywhere.

Tin Knocker 12 Gauge Edge Notcher TK-EN

Round surface edges for collars and end caps.

Specifications:

• Weight: 290 lbs
• Dimensions: 21 x 16.5 x 13 in
• Capacity: 20 Ga Mild Steel

Tin Knocker 16 Gauge Hand Corner Notcher TK-1655

A heavy versatile tool capable of not only notching to capacity but also shearing and piercing operations in lighter gauge. Of heavy cast iron and fabricated construction, this table top machine comes with front gauges and surface ground table. Optional Stand $165

Jet 16 Gauge Corner Notcher-FN-16

Built with a heavy-duty frame and a 3.15’’ by 3.15’’ notching capacity, the Corner Notcher delivers the durability needed to notch sixteen-gauge mild steel for years in your shop.

Features:

• Heavy duty frame for years of notching
• Blade can be reversed for longer cutting life
• Front cover keeps all dirt and debris away from the lifting spring
• Large base increases stability while notching

Jet Bench Hand Notcher-HN-16T

JET’s high quality cast iron sheet metal notcher is ideal or any garage or sheet metal shop. It's compact design makes it perfect for on-site use. The cutting angle is fixed at ninety degrees and can notch up to 6” x 6” in one manual stroke

Features:

• Hand Notcher
• Made of cast iron
• Capable of notching virtually any shearable material
• Can notch angles of more than 90° through a two-step process