Van Mark Multi Gauge Angle and Trim Cutter Guide (1 pair) - 3978

Van Mark Multi Gauge Angle and Trim Cutter Guide (1 pair) - 3978
Van Mark Multi Gauge Angle and Trim Cutter Guide (1 pair) - 3978
Van Mark Multi Gauge Angle and Trim Cutter Guide (1 pair) - 3978
Van Mark Multi Gauge Angle and Trim Cutter Guide (1 pair) - 3978
Van Mark Multi Gauge Angle and Trim Cutter Guide (1 pair) - 3978
The Van Mark Multi Gauge is designed to make your job easier by assisting with determining both the angle of the metal 
being bent and lining up your TrimCutter cut-off point.

The Multi Gauge radius is positioned closer to the bend for easier sighting and alignment on material
Our Price$69.95
Retails For$72.99
BrandVan Mark Products
Item Number3978
Add to comparison chart | Compare Products

The Van Mark Multi Gauge is designed to make your job easier by assisting with determining both the angle of the metal
being bent and lining up your TrimCutter cut-off point.

The Multi Gauge radius is positioned closer to the bend for easier sighting and alignment on material


Product Details:
  • Multi Gauge (PN 3978) includes a set of two gauges
  • Easy to read protractors show your bend angles
  • Also measures cut-off point for TrimCutter
  • No need to buy multiple angle and cut-off gauges
  • Quickly position anywhere along your Mark Series, TrimMaster or Metal Master brakes
  • Automatically slides up and down when making full over-bends

No recommended products at the moment.
 
Malco 18 in. Folding Tool - 3/8 and 1 in. Folding Depths - 18F
18 in. (46 cm) Folding Tool with 3/8 in. (9.5 mm) and 1 in. (25.4 mm) of depths. Longer folding tool assures a more uniform fold. Folding Tool seams are formed from 2 steel halves permanently joined together. Handy sight holes assure proper depth alignment. 18 in. (46 cm) Folding Tool with 3/8 in. (9.5 mm) and 1 in. (25.4 mm) of depths.
 Our Price: $29.99

Click for Details

 
18 in. (46 cm) Folding Tool with 3/8 in. (9.5 mm) and 1 in. (25.4 mm) of depths. Longer folding tool assures a more uniform fold. Folding Tool seams are formed from 2 steel halves permanently joined together. Handy sight holes assure proper depth alignment. 18 in. (46 cm) Folding Tool with 3/8 in. (9.5 mm) and 1 in. (25.4 mm) of depths.
Our Price: $29.99

Click for Details

 
Malco Andy Snip Pattern 14 in. - M14N
The Malco M14N 14" Aluminum Andy Pattern Snip is a big 14 inch snip with 3 1/4 inch cut length. The 14" Andy Pattern Snips will make straight cuts and mild curves through multiple layers of material. The large handles are designed so that when you need to the tool can be easily operated while wearing gloves. The Andy Snip has pressure fit insert blades that allow quick and easy replacement. Our Price: $30.99
Retails For: $34.99

Click for Details

 
The Malco M14N 14" Aluminum Andy Pattern Snip is a big 14 inch snip with 3 1/4 inch cut length. The 14" Andy Pattern Snips will make straight cuts and mild curves through multiple layers of material. The large handles are designed so that when you need to the tool can be easily operated while wearing gloves. The Andy Snip has pressure fit insert blades that allow quick and easy replacement.
Our Price: $30.99
Retails For: $34.99

Click for Details

 
Malco Redline Hand Seamer with Forged Steel Jaws 6 in. - S6R
Wide 6" jaws produce uniform, accurate bends in sheet steel and non-ferrous metals with greater control and efficiency. Wider jaws also minimize buckling and bowing of metal. Fewer strokes are required to bend and straighten angles. Designed for all the metal trades, including HVACR installation, roofing and siding applications and commercial building and remodeling. Malco's new Redline handles provide maximum comfort even on the toughest jobs, you have a tool built for a professional.
 Our Price: $78.99

Click for Details

 
Wide 6" jaws produce uniform, accurate bends in sheet steel and non-ferrous metals with greater control and efficiency. Wider jaws also minimize buckling and bowing of metal. Fewer strokes are required to bend and straighten angles. Designed for all the metal trades, including HVACR installation, roofing and siding applications and commercial building and remodeling. Malco's new Redline handles provide maximum comfort even on the toughest jobs, you have a tool built for a professional.
Our Price: $78.99

Click for Details

 
Van Mark Coil Dispenser - CD24
The Van Mark Coil Dispenser is used to hold aluminum trim coil for residential siding, roofing, window and gutter installation. The Coil Dispenser holds the rolls of trim coil securely allowing the user to dispense any length needed quickly. The trim coil can be fed directly into a brake, a slitter or onto work table. It pays for itself over and over by saving trim coil from being damaged and scrapped. Our Price: $465.00
Retails For: $479.99

Click for Details

 
The Van Mark Coil Dispenser is used to hold aluminum trim coil for residential siding, roofing, window and gutter installation. The Coil Dispenser holds the rolls of trim coil securely allowing the user to dispense any length needed quickly. The trim coil can be fed directly into a brake, a slitter or onto work table. It pays for itself over and over by saving trim coil from being damaged and scrapped.
Our Price: $465.00
Retails For: $479.99

Click for Details

 
Van Mark Wheel Kit Fits all Van Mark Brakes - 3004
This wheel kit is designed to fit onto the end of the Van Mark Trim-A-Brake II 10'-6" size. The wheel kit simply attaches to the end of the brake and allows for easy transport to and from a job site.

 Our Price: $65.00
Retails For: $67.99

Click for Details

 
This wheel kit is designed to fit onto the end of the Van Mark Trim-A-Brake II 10'-6" size. The wheel kit simply attaches to the end of the brake and allows for easy transport to and from a job site.

Our Price: $65.00
Retails For: $67.99

Click for Details

View All Reviews