Roper Whitney No. 218 Deep Throat Bench Punch

Roper Whitney No. 218 Deep Throat Bench Punch
Request a Freight QuoteThis accurate punch is ideal for prototype, short production runs and model shops. The adjustable die shoe permits the proper alignment of close fitting punches and dies to accommodate very thin materials, as well as heavier stock. The option of a cabinet base, and a 12" square gauge work table to extend their usefulness and is provided with standard equipment as indicated below.
Our Price$1,680.00
BrandRoper Whitney
Item Number131012180

This accurate punch is ideal for prototype, short production runs and model shops. The adjustable die shoe permits the proper alignment of close fitting punches and dies to accommodate very thin materials, as well as heavier stock. The option of a cabinet base, and a 12" square gauge work table to extend their usefulness and is provided with standard equipment as indicated below.

 

  • Maximum Rated Capacity:4 tons*
  • Linear Hand Operation 
  • Deep Throat (Punch holes up to 12" from edge of material) 
  • Work Heavy to Ultra Light Materials

 

Reference No. 218
IN. MM
A 21 1/2 546.1
B 17 5/8 447.68
C 12 1/4 311.15
D 4 1/2 114.3
E 2 1/16 52.39
F 3/4 19.05
G 5 127
H 24 609.6

 

This tool includes standard equipment: One L8 punch holder, one No. 20 die adaptor, one No. 40 die adaptor, one 118-2 3/4" die shoe, stripper arms, one A6 stripper plate, and one 1/2" round punch and die. Additional tooling available below.

* Refer to tonnage chart to determine if the rated capacity of this tool will accommodate the type and thickness of metal and the size and shape hole that you will be punching. Do not, under any condition, exceed the rated capacity of this tool.

 


Tons of Pressure Required to Punch Mild Steel
Round
Hole
Diameter
Ga. 20 18 16 14 12 11 10 3/16" 1/4" 5/16" 3/8" 1/2"
In. .036 .048 .062 .075 .105 .120 .135 .188 .250 .312 .375 .500
1/8" .4 .5 .6 .7 1.0 1.2 1.3 - - - - -
3/16" .5 .7 .9 1.1 1.5 1.8 2.0 2.8 - - - -
1/4" .7 .9 1.2 1.5 2.1 2.4 2.6 3.7 4.9 - - -
5/16" .9 1.2 1.5 1.8 2.6 2.9 3.3 4.6 6.1 7.8 - -
3/8" 1.1 1.4 1.8 2.2 3.1 3.5 4.0 5.5 7.4 9.2 11.1 -
7/16" 1.2 1.6 2.1 2.6 3.6 4.1 4.6 6.4 8.6 10.7 12.8 -
1/2" 1.4 1.9 2.3 2.9 4.1 4.7 5.3 7.4 9.8 12.3 14.8 19.7
9/16" 1.6 2.1 2.6 3.3 4.6 5.1 5.9 8.3 11.1 13.9 16.5 22.0
5/8" 1.8 2.4 2.9 3.7 5.1 5.9 6.6 9.2 12.3 15.4 18.5 24.6
11/16" 1.9 2.6 3.2 4.0 5.7 6.2 7.3 10.1 13.5 17.0 20.2 26.9
3/4" 2.1 2.8 3.5 4.4 6.2 7.1 7.9 11.0 14.7 18.5 22.1 29.5
13/16" 2.3 3.1 3.8 4.8 6.7 7.6 8.6 12.0 16.0 20.0 23.8 31.8
7/8" 2.5 3.3 4.1 5.1 7.2 8.3 9.2 12.9 17.2 21.5 25.8 34.4
15/16" 2.6 3.5 4.4 5.5 7.7 8.8 9.9 13.8 18.4 23.0 27.5 36.8
1" 2.8 3.8 4.7 5.9 8.2 9.4 10.6 14.8 19.7 24.6 29.5 39.4
1 1/2" 4.2 5.5 7.0 8.8 12.3 14.0 25.9 22.0 34.4 43.0 51.5 68.8
2" 5.6 7.5 9.5 11.7 16.4 18.8 21.0 29.5 39.3 49.0 59.0 78.5
2 1/2" 7.0 9.4 11.7 14.7 20.5 23.5 26.5 36.8 49.0 61.5 73.6 98.2
3" 8.5 11.3 14.0 17.6 24.5 28.2 31.7 44.2 60.0 76.5 88.4 118.0
3 1/2" 9.9 13.0 16.5 20.5 28.8 32.7 37.0 51.5 68.7 86.0 103.0 137.0
4" 11.3 15.0 18.8 23.5 32.8 37.6 42.2 60.0 78.5 98.0 188.0 157.0

Punches and Dies: Typical Size Ranges:

 


Type O

Type M

Type N

Type P

Type R

Type S

Type T

Type D
218 1/8 - 2
1/8 x 3/16 -
3/16 x 2
1/8 x 3/16 -
1 x 1 1/2
1/8 x 3/16 -
3/4 x 2
1/8 - 1 5/16
5/32 - 1 7/16
5/32 - 1 7/16
5/32 x 1/8 -
2 x 1 7/8



 

 



Request a Quote Today!

This item requires additional attention to provide you with the most competitive delivered price. We welcome you to request a quote by adding the item to your cart and proceeding through the checkout steps. When prompted for payment information, simply select ‘Quote Request’ and continue on. A specialist will be notified and contact you straight away with a complete quote!


 

No recommended products at the moment.
No recommended products at the moment.