Tennsmith 10 Foot x 18 Gauge Manual Straight Brake - HB121-18

Tennsmith 10 Foot x 18 Gauge Manual Straight Brake - HB121-18
Request a Freight QuoteTennsmith's heavy-duty hand brakes are designed and built for long service and accurate bending. Welded steel plate construction and heavy truss rods and braces provide strength and durability.
Our Price$6,165.00
BrandTennsmith
Item NumberHB121-18


Tennsmith's heavy-duty hand brakes are designed and built for long service and accurate bending. Welded steel plate construction and heavy truss rods and braces provide strength and durability.

With much more substantial steel side plates than other domestically made units, these brakes have the rigidity required for upper beam adjustment without the use of wrenches.

Equipped with thrust bearings, the upper leaf adjustment screws permit quick, accurate alignment for different material thicknesses or radii.

Other adjustment features include:

  • Leveling screws and lock nuts on the pedestals
  • Jack screws and tensioner bolts on the apron
  • Truss rods on the apron, base and upper beam
  • Fully adjustable counter balances to facilitate the bending process
  • Replaceable nose bar and apron inserts
Removable apron angle and insert permit 1/4" reverse bends in lighter material. Bored in line to ensure perfect alignment, the pivot points are fitted with oil-impregnated bearings. The hinge pins are high-tensile alloy steel.

Ductile steel clamps handles, heavy yokes, grease fittings, and an apron stop rod complement the many other fine features of these heavy-duty brakes.

The HB121-18 Features:
  • A mild steel capacity of 18 gauge (1.25mm)
  • A bending length of 18 in (3073mm)
  • A maximum beam-lift of 1 7/8" (47mm)
  • A front-to-rear beam adjustment of 1/2" (13mm)
  • A minimum reverse bend of 1/4" (6mm)
  • A minimum flange in capacity material of 1" (25mm)
  • Shipping dimensions of 159x52x60in (4039x1321x1524mm)
  • A shipping weight of 2300lb (1043kg)
Note: The picture above depicts the HB121-16 10' Brake; this listing is for the 121-18.


Request a Quote Today!

This item requires additional attention to provide you with the most competitive delivered price. We welcome you to request a quote by adding the item to your cart and proceeding through the checkout steps. When prompted for payment information, simply select ‘Quote Request’ and continue on. A specialist will be notified and contact you straight away with a complete quote!

 

No recommended products at the moment.
 
Van Mark Siding Brake - 10 Ft 6 In Mark IV Industrial TrimMaster - IT10
View
Free ShippingPlease Allow 5-6 Weeks for Delivery

Van Mark Brake - IT10 Mark IV 10 Ft 6 In Trim Master Industrial Series Sheet Metal Bending, Commercial Roofing and Aluminum Siding Brake. New POWERslot hinge technology gives you more bending power on thicker materials with less effort!

FREE SHIPPING to COMMERCIAL ADDRESSES within the lower 48 United States!

Click for Details

 
 
Van Mark 24 In. Perforator / Slitter Combo - SCI24HD
View
Free ShippingThe 24" Combo Perf Package goes everywhere you need to slit, rib, or perforate aluminum, copper, galvanized painted steel and galvalume (including 24 ga.). Package includes 24-inch HD slitter, high-torque motor, and UniStand EX-Go. Perforating dies (for perforating most light to medium construction grade materials) offer 3.36 inches of net free area per linear foot per pass. Additionally, the Combo Perf Package loads quickly for easy transport to your job site.



Backordered. Estimated to ship in 8 to 12 weeks.

Click for Details