14 in x 20 ft Aluminum Plank, 2-Man, 500lb Rated

14 in x 20 ft Aluminum Plank, 2-Man, 500lb Rated
14 in x 20 ft Aluminum Plank, 2-Man, 500lb Rated
14 in x 20 ft Aluminum Plank, 2-Man, 500lb Rated
14 in x 20 ft Aluminum Plank, 2-Man, 500lb Rated
14 in x 20 ft Aluminum Plank, 2-Man, 500lb Rated
14 in x 20 ft Aluminum Plank, 2-Man, 500lb Rated
Request a Freight Quote
Made in the USAStrong and Durable 2-Man, 500lb Rated Aluminum Plank. Available in Poly-Reinforced Rubber Handles or High Density ABS Plastic Connectable Handles.
Made with 100% American aluminum and assembled in America.




Our Price$444.00
Retails For$499.99
BrandMagnum Tools
Item Number421420

These planks are made of 100% American aluminum and built in Detroit. The plank handles are made from a thick poly-reinforced rubber; flexible yet durable. Comfortable to the hands, no rough metal. No vinyl coating that will rip off. Optional connectable handles available; made from High Density ABS Plastic.

Please call to see if you qualify for free shipping. 866-588-6300


See our planks used in conjunction with the Leader Tool Aluminum Pump Jack System




Request a Quote Today!

This item requires additional attention to provide you with the most competitive delivered price. We welcome you to request a quote by adding the item to your cart and proceeding through the checkout steps. When prompted for payment information, simply select ‘Quote Request’ and continue on. A specialist will be notified and contact you straight away with a complete quote!


 

No recommended products at the moment.
 
Magnum 2-Pole 24 Ft. Aluminum Pump Jack System
View Free ShippingOur 2-Pole 24 Ft. Aluminum Pump Jack System will lift you to new heights! No other equipment will revolutionize your job site efficiency like pump jack scaffolding. Put deep cuts in to your labor costs and dramatically speed up on-site production on siding jobs, trim and window installation, re-pointing, painting and more! Complete your system with our 500 Lb. Rated 2-Man Aluminum Scaffold Planks!

FREE SHIPPING to commercial addresses* within the continental United States.

Click for Details

 
 
Malco Hole Cutter - HC1
When cutting circles on sheet metal, getting a clean cut in the middle of a material can be daunting. This hole cutter from Malco allows for pinpoint placement of the circles center, and will cut a perfect circle through thin gauge sheet metal. By making one cut, material is saved from being scrapped and time is saved by getting the cut right the first time. Our Price: $73.65

Click for Details

 
When cutting circles on sheet metal, getting a clean cut in the middle of a material can be daunting. This hole cutter from Malco allows for pinpoint placement of the circles center, and will cut a perfect circle through thin gauge sheet metal. By making one cut, material is saved from being scrapped and time is saved by getting the cut right the first time.
Our Price: $73.65

Click for Details

 
Tapco Side Winder Coil Dispenser - 10776
Tapco 10776 Side Winder Coil Holder. Allows you to feed coil directly into the jaws of your PRO Brake. Holds up to 24" (61,0 cm) wide coil. Weighs only 24 lbs. (10,7 kg) Our Price: $528.00

Click for Details

 
Tapco 10776 Side Winder Coil Holder. Allows you to feed coil directly into the jaws of your PRO Brake. Holds up to 24" (61,0 cm) wide coil. Weighs only 24 lbs. (10,7 kg)
Our Price: $528.00

Click for Details

 
Van Mark Coil Dispenser - CD24
The Van Mark Coil Dispenser is used to hold aluminum trim coil for residential siding, roofing, window and gutter installation. The Coil Dispenser holds the rolls of trim coil securely allowing the user to dispense any length needed quickly. The trim coil can be fed directly into a brake, a slitter or onto work table. It pays for itself over and over by saving trim coil from being damaged and scrapped. Our Price: $435.00
Retails For: $479.99

Click for Details

 
The Van Mark Coil Dispenser is used to hold aluminum trim coil for residential siding, roofing, window and gutter installation. The Coil Dispenser holds the rolls of trim coil securely allowing the user to dispense any length needed quickly. The trim coil can be fed directly into a brake, a slitter or onto work table. It pays for itself over and over by saving trim coil from being damaged and scrapped.
Our Price: $435.00
Retails For: $479.99

Click for Details

 
Van Mark Unistand Adjustable Rolling Leg Kit - USA2EZ
Unistand Adjustable mounts all the popular Van Mark tools and is built from durable steel.  UniStand allows easy maneuverability and will not sink into lawns. Designed for Metal Master Series.  Our Price: $515.00
Retails For: $564.99

Click for Details

 
Unistand Adjustable mounts all the popular Van Mark tools and is built from durable steel.  UniStand allows easy maneuverability and will not sink into lawns. Designed for Metal Master Series. 
Our Price: $515.00
Retails For: $564.99

Click for Details