Professional Engineering Company Big Bear Aluminum Trim Coil Dispenser - PECBB

Professional Engineering Company Big Bear Aluminum Trim Coil Dispenser - PECBB
The Big Bear Aluminum Trim Coil Dispenser takes the taped aluminum coil directly of the shipping box, secures it with the two adjustable-tension bungee cords, then the shipping tape can be cut so that the coil stays secure at all times. The Big Bear dispenser can even be clamped to your work table and if you are working on the grass a screw driver can be staked into the ground to hold it in place.
Our Price$49.99
BrandProfessional Engineering Company
Item NumberPECBB

www.magnumtools.com

Big Bear Trim Coil Dispensers are specifically designed to prevent trim coil (the USA - 50' coils or Canada - 98.5' coils) from accidentally unraveling, becoming damaged and a safety hazard. The adjustable bungee cords and felt pads make it easy to dispense material. The coil can be wound backwards so that the sharp end of the coil is safe and allows you to put the whole unit back into the coils’ box for storage and extra protection. The Big Bear is constructed of hi-impact ABS (the same material used for hard hats) and 5/16” dia. UV protected bungee cords.

The Coil Accessory that Pays for Itself Over and Over Again!

You know the drill: as soon as you cut the thin piece of tape that is wrapped around the aluminum trim coil when you receive it – it becomes a constant effort to prevent the coil from unraveling, potentially causing damage to the coil, making it unusable. To make thing more difficult, the end of the aluminum trim coil on the outside of the roll is sharp and will easily cut a person if not careful.

There is a better way to reduce damage, cut waste and make your job safer and more efficient!

The Big Bear Aluminum Trim Coil Dispenser takes the taped aluminum coil directly of the shipping box, secures it with the two adjustable-tension bungee cords, then the shipping tape can be cut so that the coil stays secure at all times. The Big Bear tm dispenser can even be clamped to your work table and if you are working on the grass a screw driver can be staked into the ground to hold it in place. No mess, no hassle, no issues!

As compared to other products on the market that may dispense coil, few do so without having the coil unravel in the dispenser and even fewer allow the coil to remain in the dispenser for safe storage. With Big Bear, when the day is done and you have extra coil stock left over, it can easily be wound backwards protecting the sharp cut off end from damage and making it safer. For further protection when storing, the Big Bear with the coil still attached, can be placed back into the coils shipping box.

Please review these other products:

 
Tapco Side Winder Coil Dispenser - 10776
Tapco 10776 Side Winder Coil Holder. Allows you to feed coil directly into the jaws of your PRO Brake. Holds up to 24" (61,0 cm) wide coil. Weighs only 24 lbs. (10,7 kg) Our Price: $416.00

Click for Details

 
Tapco 10776 Side Winder Coil Holder. Allows you to feed coil directly into the jaws of your PRO Brake. Holds up to 24" (61,0 cm) wide coil. Weighs only 24 lbs. (10,7 kg)
Our Price: $416.00

Click for Details

 
Tapco PRO Coiler Portable Coil Holder - 10367
The Tapco 10367 PRO-Coiler is the portable trim coil holder for use with the "Windy" SP and Port-O-Slitter. This lightweight tool is durable and easy to use with simple attachment and detachment from either the "Windy" or the Port-O-Slitter.  Our Price: $189.39

Click for Details

 
The Tapco 10367 PRO-Coiler is the portable trim coil holder for use with the "Windy" SP and Port-O-Slitter. This lightweight tool is durable and easy to use with simple attachment and detachment from either the "Windy" or the Port-O-Slitter. 
Our Price: $189.39

Click for Details

 
Van Mark CC36 Coil Cradle
Take control of all your coil handling situations with the original coil stock tool Coil Cradle from Van Mark Products. Pioneered by Van Mark, Coil Cradle gives you one-hand dispensing of coil without snags and without damage. In the shop, use a Coil Cradle with your basic color coils and see the reduction in scrap over a period of time. Any tool that pays for itself is a tool that will pay you Our Price: $456.00
Retails For: $513.99

Click for Details

 
Take control of all your coil handling situations with the original coil stock tool Coil Cradle from Van Mark Products. Pioneered by Van Mark, Coil Cradle gives you one-hand dispensing of coil without snags and without damage. In the shop, use a Coil Cradle with your basic color coils and see the reduction in scrap over a period of time. Any tool that pays for itself is a tool that will pay you
Our Price: $456.00
Retails For: $513.99

Click for Details

 
Malco Trim Nail Punch - TNP3S
Pocket size punch is constructed of hardened steel, the tool will hold and install standard 1-1/4” (31.2 mm) trim nails. Small size allows easy access to recesses of formed trim pieces. Hex collar prevents rolling when tool is set down. Corrosion resistant.

Product Specifications:
  • Corrosion resistant
  • Pocket size punch is constructed of hardened steel, the tool will hold and install standard 1 1/4" trim nails
  • Small size allows easy access to recesses of formed trim pieces
Our Price: $10.99
Retails For: $12.99

Click for Details

 
Pocket size punch is constructed of hardened steel, the tool will hold and install standard 1-1/4” (31.2 mm) trim nails. Small size allows easy access to recesses of formed trim pieces. Hex collar prevents rolling when tool is set down. Corrosion resistant.

Product Specifications:
  • Corrosion resistant
  • Pocket size punch is constructed of hardened steel, the tool will hold and install standard 1 1/4" trim nails
  • Small size allows easy access to recesses of formed trim pieces
Our Price: $10.99
Retails For: $12.99

Click for Details

 
Van Mark Wheel Kit Fits all Van Mark Brakes - 3004
This wheel kit is designed to fit onto the end of the Van Mark Trim-A-Brake II 10'-6" size. The wheel kit simply attaches to the end of the brake and allows for easy transport to and from a job site.

Our Price: $65.00
Retails For: $67.99

Click for Details

 
This wheel kit is designed to fit onto the end of the Van Mark Trim-A-Brake II 10'-6" size. The wheel kit simply attaches to the end of the brake and allows for easy transport to and from a job site.

Our Price: $65.00
Retails For: $67.99

Click for Details

 
Van Mark Folding Steel Leg Kit Fits Trim-A-Brake II Series Brakes - 3000
The Van Mark Steel Folding Legs #3000 are the most popular support system for the Van Mark Brake model T1050. It is a strong and durable stand that folds up for transport and storage. It is easily installed using a Phillips screwdriver. Van Mark makes the strongest, most durable and highest quality job site tools in the industry and all of Van Mark's products are manufactured and assembled in the USA. Our Price: $97.95
Retails For: $124.99

Click for Details

 
The Van Mark Steel Folding Legs #3000 are the most popular support system for the Van Mark Brake model T1050. It is a strong and durable stand that folds up for transport and storage. It is easily installed using a Phillips screwdriver. Van Mark makes the strongest, most durable and highest quality job site tools in the industry and all of Van Mark's products are manufactured and assembled in the USA.
Our Price: $97.95
Retails For: $124.99

Click for Details

 
Midwest Snips Interchangeable Blade Seamer 5 in./9 in. MW-S59
Midwest Snips patent pending Interchangeable Blade Seamers are tradesman quality and offer both the distributor and end-user space and cost savings. Blades are interchangeable on both straight and offset models. Forged steel blades are offered in 3-inch and 6-inch lengths and extruded aluminum blades are available in 5-inch and 9-inch lengths. Choose the blade type most often used in the desired handle style and add inexpensive blade kits for quick change-over when needed. Our Price: $67.99
Retails For: $78.99

Click for Details

 
Midwest Snips patent pending Interchangeable Blade Seamers are tradesman quality and offer both the distributor and end-user space and cost savings. Blades are interchangeable on both straight and offset models. Forged steel blades are offered in 3-inch and 6-inch lengths and extruded aluminum blades are available in 5-inch and 9-inch lengths. Choose the blade type most often used in the desired handle style and add inexpensive blade kits for quick change-over when needed.
Our Price: $67.99
Retails For: $78.99

Click for Details

 
Midwest Snips Adjustable Hand Brake 6 in. MW-6HB
Small compact hand brake is made from tough, corrosion resistant
stainless steel. Makes quick accurate bends in aluminum siding, trim
coil and fascia.
Our Price: $24.99
Retails For: $28.99

Click for Details

 
Small compact hand brake is made from tough, corrosion resistant stainless steel. Makes quick accurate bends in aluminum siding, trim coil and fascia.
Our Price: $24.99
Retails For: $28.99

Click for Details